Samsung Galaxy S20 + vs Galaxy S10 +

Samsung is one of the most prominent brands in the market. Their devices always attract attention in the world of smartphones and although it is usually compared with other brands, it is also worth comparing between families. In this case, let’s see the differences between the Samsung Galaxy S20 + vs Galaxy S10 +.

If you are about to buy a phone, you might want to dig a little about your alternatives. Although the Galaxy S10 + is a 2019 device, it is still very current and you could get a lot out of it. The Galaxy S20 +, on the other hand, is more recent, from 2020, so it is likely to have some new features compared to the previous model, being its size one of the most interesting ones.

Do you want to know what are the differences between the Samsung Galaxy S20 + vs Galaxy S10 +? Find them out below.


Both phones have screens with ultra-high resolution Dynamic AMOLED technology Quad HD 2560×1440 pixels with a slight difference in size of only 0.3 inches. The S10 + has a diagonal of 6.4 inches, while the S20 + reaches 6.7 inches.

On the other hand, the S20+ has HDR10+, a new HDR format that features improvements in brightness levels, sharpness, contrast and colors that will make the details on the screen more realistic. The S20+, meanwhile, has a refresh rate of 120Hz, while its predecessor has only 60Hz. This improvement makes your videos and animations on the S20+ more fluid.


If we analyze the differences between the Samsung Galaxy S20 + vs Galaxy S10 + we will notice that in design they are similar, since both feature a combination of glass and metal, with solid finishes. However, since the Galaxy S20 + is newer than the S10 +, it has a slightly refreshed design.

This device has a vertical rectangular camera housing at the top left of its rear, while that of the S10 + is a horizontal rectangular housing located in the center of the back. The location of the front camera has also changed. On the S10 + it is located in the upper right corner of the screen and on the S20 + it is in the center. 

As for their similarities, both devices have fingerprint sensor under the screen and both are resistant to water and dust.

Processor and RAM

The processor of these devices may vary depending on the country where they are assembled. The Samsung Galaxy S10+ can be found with two types of processor: the 2019 Exynos 9820 or the Qualcomm Snapdragon 855. As for its RAM, the standard is 8 GB, although there are ceramic models that can have 12 GB.

As for the Samsung Galaxy S20 +, in Europe it can be found with the 2020 Exynos 990 processor and in the United States and some other countries with the Qualcomm Snapdragon 865 processor. Both processors are compatible with 12 GB of RAM as standard.


The photographic section is one of the most interesting to users. In the battle Samsung Galaxy S20 + vs Galaxy S10 + there are some appreciable differences. While it is true that both devices have a quad-camera configuration, the S20 + incorporates a 12 MP main camera with a fixed aperture and larger pixels. The S10+, on the other hand, has a dual aperture.

Another difference between these terminals is the 64 MP sensor of the telephoto lens of the S20 +, compared to the 12 MP sensor of the S10 +. The front camera also has its variations, because while the S20 + has only one camera, the S10 + has two sensors. 

So who wins the battle Samsung Galaxy S20 + vs Galaxy S10 +? It all depends on your needs and budget, but you should keep a few things in mind. The S20 + stands out for having several improvements over the S10 +, including a nicer design, more camera capabilities and a larger and faster screen.

However, these improvements do not detract from the S10 +, as it is still an excellent smartphone and also cheaper than the S20 + for being an older model. Therefore, if you have a more limited budget, the S10 + can be a great option.